![background image](http://html1.mh-extra.com/html/nec/bull-novascale-r620-series/bull-novascale-r620-series_user-manual_3916556196.webp)
NovaScale R620 User Guide
sheet.
The community names to receive SNMP packets from are listed in the [SNMP Community] list box.
3.
Click the [OK] button to terminate the operation.
Disk Maintenance While ESMPRO Agent is Running
The following works to disks (hard disk drive or magneto optical) are not allowed while ESMPRO Agent is running;
To format or delete a partition by Disk Administrator or by other means.
To request programmatically to remove media from removable disks such as MO, Zip and PD.
1.
Connect the machine using Web UI.
2.
Click the [Maintenance].
3.
Click the [Terminal Service]
4.
Log on as an administrator
5.
Select the [Start] – [Settings] – [Control Panel]
6.
Open the [Service]
7.
Select a service named “ESM Common Service”, and click the [Stop].
8.
Confirm that “ESM Common Service” stopped, and close the [Service].
9.
Do the disk-related works.
10.
Open the [Service] again, select “ESM Common Service” and click the [Start].
11.
Confirm that “ESM Common Service” is active and close the [Service] and [Control Panel].
About the warning event of CPU load Monitoring
If ESMPRO Agent cannot get performance information from the OS due to a temporary resource shortage or high load
ratio on the system, it will record the following event log. However, there is no real problem on operation. (In the
description, Y and X represent alphanumeric characters.)
Source: ESMCpuPerf
Event ID:
9005
Description: Cannot get system performance information now (YYYY Code=xxxx).
If ESMPRO Agent cannot get information, it will treat the load ratio as 0%. So, if ESMPRO Agent cannot get
information continuously, the CPU load ratio may appear lower than the actual value.
Connection with Hard Disk Drive
The preventive hard disk drive maintenance function may not work properly when a hard disk drive which was used in
a system where ESMPRO Agent is installed is connected to other systems. Make sure not to connect such hard disk
drives.
Change Settings of File System Monitoring Function
New settings in thresholds of monitoring interval and free space monitoring are not reflected immediately after they are
changed. They are reflected at the next monitoring interval of monitoring service.
CPU Load Ratio of SNMP Service (snmp.exe)
While monitoring the server from ESMPRO Manager, the CPU load ratio of SNMP Service on the ESMPRO Agent
side may increase at every monitoring interval (default: 1 minute).
5-22
Summary of Contents for Bull NovaScale R620 Series
