![background image](http://html1.mh-extra.com/html/nec/bull-novascale-r620-series/bull-novascale-r620-series_user-manual_3916556080.webp)
NovaScale R620 User Guide
10.
Open the disk’s properties to check the target IDs. In the following figures, disks are configured as:
Disk 1: Target ID 1
Disk 2: Target ID 2
Disk 3: Target ID 4
Disk 4: Target ID 5
Disks with the pair of target ID 1 and 4, 2 and 5
are mirrored.
Disk 1
Disk 2
Disk 5
Disk 4
IMPORTANT:
Hard disks are numbered from “0” at the OS start-up according to the position they are inserted. When you
increase a hard disk while the system is running, it will be given a number that is not used for any disks.
However when you restart the system, the old disk numbers will not be retained and disks are re-numbered
according to the hard disk position. Therefore, you need to determine which disks are mirrored based on
target IDs, which are always fixed, but not on disk numbers because disk numbers may change.
3-21
Summary of Contents for Bull NovaScale R620 Series
