![background image](http://html1.mh-extra.com/html/nec/bull-novascale-r620-series/bull-novascale-r620-series_user-manual_3916556337.webp)
NovaScale R620 User Guide
PCI board
5.
Gently insert the slot on the board against the connecting part of the
board
.
6.
Insert the board for connecting part of the board to securely connect to the slot.
IMPORTANT:
If you have trouble installing the board, remove the board once and install it again. Be careful since the board
gets damaged if you press it too hard.
7.
Install the PCI bracket and secure the board
.
8.
Install CPU/IO module referring to the page 8-13.
9.
Turn ON the power by pressing the POWER switch of installed CPU/IO module.
Removing PCI Board
Removal of PCI board card follows the reverse procedure of the installation and installs the expansion slot cover.
Replacing a PCI Board
Follow the procedure below to replace a failed PCI board.
1.
Check the PCI board LED and identify the failed PCI board.
When the PCI board is failed or incorrectly installed, the three LEDs associated with the PCI board slot are
being turned off.
2.
Remove the CPU/IO module referring to the page 8-11. .
3.
Remove the PCI bracket, and then remove the PCI board.
4.
Replace the board and fasten it.
5.
Install the CPU/IO module referring to the page 8-13. .
8-33
Summary of Contents for Bull NovaScale R620 Series
