APPENDIX B – GUI
B-23
CDS7324 (FORMERLY LSF-0819)
Rev. A
INSTALLATION & USER’S MANUAL
B.2.16.20 Continuous
Bus
Voltage
The Continuous Bus Voltage panel shows the bus voltage status and allows the voltage limits to be set.
•
Detected Bus Voltage (V)
→
The actual value of the bus voltage.
•
Over Voltage Limit (V)
→
The bus voltage at which a bus over-voltage fault is indicated.
•
Under Voltage Limit (V)
→
The bus voltage at which a bus under-voltage fault is indicated. This is read only,
the value being set by the percentage parameter.
•
Under Volt. Limit % of Vdc Nom. (%)
→
The percentage of the nominal voltage that will be used as the under
voltage limit.
