APPENDIX B – GUI
B-41
CDS7324 (FORMERLY LSF-0819)
Rev. A
INSTALLATION & USER’S MANUAL
B.2.16.40 Board Status Byte 1
DIGITAL BOARD STATUS BYTE 1 :
•
FPGA Configuration Transmission
→
Indicates if there is a fault in FPGA configuration transmission.
•
DSP Programming
→
Indicates there is a DSP programming fault.
•
QSPI Loopback
→
Indicates there is a QSPI loopback fault.
•
Ambient over temperature
→
Indicates that the ambient temperature is greater than the programmed limit.
•
Ambient Thermal Foldback Warning
→
Indicates that the ambient temperature has reached 90% of the set
temperature at which point thermal limiting begins.
•
Ambient Thermal Warning
→
Indicates that the ambient temperature has reached 90% of the set temperature
at which a thermal fault occurs.
B.2.16.41 Board Status Byte 2
DIGITAL BOARD STATUS BYTE 2 :
•
COM1 loopback
→
The result of the loop back test performed during initialisation of the drive.
•
COM1 initialisation
→
The result of the COM port initialisation
