APPENDIX G – ETHERNET MEZZANINE CARD G-2
CDS7324 (FORMERLY LSF-0819)
Rev. A
INSTALLATION & USER’S MANUAL
2. IO
Mode.
A subset of the drive parameter set is mapped directly to registers in the interface. A client can read or
write this parameter set directly via reads and writes. A client performs a single read or write to access a
parameter or parameters mapped to the interface.
G.3
Changing IP Address for Ethernet Device
The default IP address is 192.168.0.100 when shipped from the factory unless otherwise stated in
paperwork accompanying the drive. The Ethernet device uses a Static IP Address. Startup your browser
and access the device at this address, then click the ‘Edit’ button in the ‘Network Settings’ window:
