APPENDIX B – GUI
B-30
CDS7324 (FORMERLY LSF-0819)
Rev. A
INSTALLATION & USER’S MANUAL
B.2.16.28 Internal
Regen
The Internal Regen panel allows the user to see the internal regeneration resistor parameters.
The internal regeneration resistor is effectively connected in parallel with the external one (if connected) because
the same transistor controls them.
INTERNAL REGENERATION RESISTOR PARAMETERS :
•
Resistance (Ohm)
→
The internal regeneration resistor value.
•
Power (W)
→
The internal regeneration resistor power.
•
Continuous/Initial on-time (s)
→
These values are calculated by the software to set the appropriate duty cycle
for the regeneration transistor.
B.2.16.29 External
Regen
The External Regen panel allows the user to see the external regeneration resistor parameters.
EXTERNAL REGENERATION RESISTOR PARAMETERS :
•
Resistance (Ohm)
→
The external regeneration resistor value.
•
Power (W)
→
The external regeneration resistor power.
•
Continuous/Initial on-time (s)
→
These values are calculated by the software to set the appropriate duty cycle
for the regeneration transistor.
