6 - 12 6 - 12
MELSEC-Q
6 UTILITY PACKAGE (GX Configurator-PT)
<Initial setting of positioning data>
Select items
to be moved
to sub window.
Move to
sub window
Axis #1
Positioning
Setting
[Explanation of items]
(1) Setting item list
Setting item
Axis #1 Parameter Setting
Axis #1 OPR data Setting
to
Axis # n Parameter Setting
Axis # n OPR data Setting
Axis #1 Positioning Data Setting
to
Axis #n Positioning Data Setting
n indicates the axis No.
QD70P4: 1 to 4 QD70P8: 1 to 8
(2) Explanation of the command buttons
Make text file
Outputs the screen display in a text file format.
End setup
Confirms the entry of set data and ends the operation.
Cancel
Cancels the set data and ends the operation.
POINT
Initial settings are stored in the intelligent module parameters. Once the initial
settings are written to the CPU module, they can be enabled by performing STOP
RUN STOP RUN operations for the CPU module, turning the power OFF
and then ON, or resetting the CPU module.
If the initialization settings have been written by a sequence program, the
initialization settings will be executed during the STOP RUN of the CPU module.
Arrange so that the initial settings written by the sequence program are re-executed
during the STOP RUN of the CPU module.
Summary of Contents for GX Configurator-PT
Page 13: ...MEMO SECTION 1...
Page 127: ...7 20 7 20 MELSEC Q 7 SEQUENCE PROGRAM USED FOR POSITIONING CONTROL MEMO...
Page 129: ...MEMO SECTION 2...
Page 221: ...Index 5 Index 5 MEMO...