Mitsubishi Electric MR-J2S-10CP, Instruction Manual

Page: 323 / 357

15 - 16
15. COMMUNICATION FUNCTIONS
(14) Data for test operation mode (Command [9][2] [A][0])
Command Data No. Description Setting range Frame length
[9][2] [0][0] Input signal for test operation Refer to
section 15.12.7
8
[9][2] [A][0] Forced output from signal pin Refer to
section 15.12.9
8
Command Data No. Description Setting range Frame length
[A][0] [1][0]
Writes the speed of the test operation mode (jog operation,
positioning operation). 0000 to 7FFF
4
[A][0] [1][1]
Writes the acceleration/deceleration time constant of the
test operation mode (jog operation, positioning operation). 00000000 to
7FFFFFFF
8
[A][0] [1][2]
Clears the acceleration/deceleration time constant of the
test operation mode (jog operation, positioning operation). 1EA5
4
[A][0] [1][3]
Writes the moving distance (in pulses) of the test operation
mode (jog operation, positioning operation). 80000000 to
7FFFFFFF
8
[A][0] [1][5]
Temporary stop command of the test operation mode (jog
operation, positioning operation) 1EA5
4
(15) Group setting (Command [9][F])
Command Data No. Description Setting range Frame length
[9][F] [0][0] Setting of group a to f 4