Mitsubishi Electric City Multi PURY-EM200YNW-A1, Service Handbook

Page: 386 / 503

[8-13 Parts Replacement Instructions (Outdoor Unit) ]
BS_08_L chapter 8 -
119
8 Troub
le
sho
o
ting Bas
e
d on Ob
ser
ved
Sy
mp
toms
(11) Before removing the front heat exchanger, protect the surrounding electrical components and the pipe cover with a
recommended felt soaked in water, and then remove the braze from four areas. (See Figures 8 and 9.)
To remove the right and left rear heat exchangers, remove the braze from four areas. (See Figures 10 - 13.)
Brazed area Brazed area
Brazed area Brazed area
Brazed area Brazed area
Removal of the front heat exchanger on a
high-efficiency model (Figure 8)
Removal of the front heat exchanger on a
standard model (Figure 9)
Removal of the left rear heat exchanger on
a high-efficiency model (Figure 10)
Removal of the right rear heat exchanger on
a high-efficiency model (Figure 12)
Removal of the right rear heat exchanger
on a standard model (Figure 13)
Removal of the left rear heat exchanger
on a standard model (Figure 11)
0000006416.BOOK 119 ページ ２０２１年１０月２６日 火曜日 午後５時３０分