Mitsubishi Electric City Multi PURY-EM200YNW-A1, Service Handbook

Page: 134 / 503

[5-1 Dipswitch Functions and Factory Settings ]
BS_05_M chapter 5 -
3
5
Cont
rol
7) Selectable with the function switches SW6-9 and SW6-10.
SW6-10
ON OFF
SW6-9
ON Self-diagnosis monitor display (round
type LED) No. 0 to 1023
Self-diagnosis monitor display (7seg
LED) No. 1024 to 2047
OFF SW4 function setting mode No. 0 to 1023 Self-diagnosis monitor display (7seg
LED) No. 0 to 1023
Switch Function
Function according to switch setting
Switch setting timing
OFF (LED3 Unlit) ON (LED3 Lit)
SW4
SW6-10:
OFF
1-10
1:ON, 0:OFF
Self-diagnosis/operation
monitor
Refer to the following page(s). [10 LED Sta-
tus Indicators]
Anytime after power on
SW4
1-10
[0:OFF,
1:ON]
(Note 1)
SW6-10:ON
No.769 1000000011 Test run mode: ON/OFF Stops all ICs
Sends a test-run sig-
nal to all IC
Anytime after power on
No.817 1000110011 Starts up drive recorder Enabled Disabled Anytime after power on
No.818 0100110011
Data collection during an
error
Disabled Enabled Anytime after power on
No.832 0000001011
Cumulative compressor
operation time deletion
Retained Cleared Anytime after power on (OFF → ON)
No.848 0000101011
Continuous heating cycle
function
Disabled Enabled
After being energized and while the compres-
sor is stopped
No.876 0011011011
High-pressure over-rise
backup setting
SV2 is used. LEV9 is used.
After being energized and while the compres-
sor is stopped
No.885 1010111011
Fan speed setting at low
outside temperature heat-
ing
Refer to Note 8).
After being energized and while the compres-
sor is stopped
No.886 0110111011
After being energized and while the compres-
sor is stopped
No.891 1101111011
Smooth auto-shift startup
mode
Disabled Enabled
After being energized and while the compres-
sor is stopped
No.896 0000000111
Clearance of error
history SW
OC Retained (IC/OC) Deleted (IC/OC) Anytime after power on (OFF → ON)
No.897 1000000111
High sensible heat opera-
tion setting
Depends on the combined setting with No.
900 (Note 7)
Anytime after power on (OFF → ON)
No.900 0010000111
High sensible heat opera-
tion setting
Depends on the combined setting with No.
897 (Note 7)
Anytime after power on (OFF → ON)
No.912 0000100111 Pump down function Normal control
Pump down opera-
tion
After being energized and while the compres-
sor is stopped
No.913 1000100111 Forced defrost (Note 2) Normal control Forced defrost starts
10 minutes after the completion of defrost op-
eration (OFF → ON) or 10 minutes after com-
pressor start-up (OFF → ON)
No.915 1100100111
Defrost start temperature
(Note 2)
(E)P200, (E)P250:
-10°C [14°F]
(E)P300 - (E)P500:
-8°C [18°F]
-5°C [23°F] Anytime after power on
No.916 0010100111
Defrost end temperature
(Note 2)
7°C [45°F] 12°C [54°F] Anytime after power on
No.918 0110100111
Changes the defrost timer
setting (Note 2)
50 minutes 90 minutes Anytime after power on (OFF → ON)
No.921 1001100111 Temperature unit display °C °F Anytime after power on
No.922 0101100111
Refrigerant amount adjust-
ment
Normal control
Refrigerant amount
adjust mode
Anytime after power on (except during initial
startup/becomes ineffective 90 minutes after
compressor started up.)
No.933 1010010111 Snow sensor setting
Effective only when
TH7 ≤ 5 is true or the
snow sensor contact
input is on.
Effective when TH7
≤ 5 is true
Anytime after power on
No.934 0110010111 Snow sensor setting
Continuous fan op-
eration (FAN=50%)
Intermittent fan op-
eration (100% for 5
minutes ↔ 0% for 30
minutes)
Anytime after power on
No.935 1110010111
High heating power (at low
outside temperature)
Effective Ineffective Anytime after power on
No.956 0111011110
SV2 control time setting af-
ter recovery from defrost
Always ON 5 minutes
After being energized and while the compres-
sor is stopped
No.958 0111110111
Clear the history of com-
pleting initial control
Retained Cleared
After being energized and while the compres-
sor is stopped
* Effective only OFF to ON
No.982 0110101111
Target evaporation tem-
perature setting
Refer to Note 3). Anytime after power on
No.997 1010011111
Multiple-stage low-noise
setting
Depends on the combined setting with No.
1006 (Note 6)
Depends on the combined setting with 997
(Note 7)
After being energized and while the compres-
sor is stopped
No.1006 0111011111
After being energized and while the compres-
sor is stopped
0000006450.BOOK 3 ページ ２０２１年１０月２６日 火曜日 午後７時２分