Mindray Accutorr 7, Operator'S Manual

Page: 42 / 200

3 - 6 Accutorr 7 Operator’s Manual
3.4.2 Using the Knob
Using the knob on the front panel of the monitor can do the following operations:
■
Rotate the knob clockwise or counterclockwise to move the cursor.
■
Press the knob to select one item, such as accessing a menu or confirming the
selection
3.4.3 Using the Touchscreen
Select screen items by pressing them directly on the monitor’s screen.
You can disable touchscreen operation by pressing and holding the [ Main ] QuickKey for
3 seconds. Then a padlock symbol on the [ Main ] QuickKey is displayed.
When the screen is locked, you can enable the touchscreen operation by pressing and
holding the [
Main ] Quickkey for 3 seconds.
3.5 Using the Timer
The monitor has a Timer function to notify you when a preset time period is expired.
3.5.1 Displaying the Timer
To display the timer, follow this procedure:
1. Select the [ Main ] Quickkey.
2. Select [ Timer >> ] to enter [ Timer ] window.
3.5.2 Controlling the Timer
The timer provides the following controls:
■
Select [ Setup ] to access the [ Timer Setup ] window, in which you can set the
[ Direction ] to [ Up ] or [ Down ]. If you select [ Down ], you should set:
◆
[ Run Time(h:min:s) ]: The available time range is 0 to 100 hours, and the
default time is 5 minutes.
◆
[ Reminder Vol ]: During the last 10 seconds of the countdown, the system
issues a reminder tone. The available volume range is 0 to 10. 0 means off,
and 10 the maximum volume.
■
Select [ Start ] or [ Pause ] to start or pause the timer.
■
Select [ Clear ] to clear current timing result.