Mindray Accutorr 7, Operator'S Manual

Page: 39 / 200

Accutorr 7 Operator’s Manual 3 - 3
3.2 General Operation
Read this operator's manual carefully before using this monitor. Familiarize yourself with
the equipment's function and operation, and observe the warnings and cautions
included in the manual.
3.2.1 Connection to AC Power
This monitor can be powered by AC power or battery. Connect the power cord to the AC
input on the back of the monitor, and connect the other end of the power cord to the
power outlet.
WARNING
•
Always use the accompanying power cord with the monitor.
•
Use the battery if the integrity of the protective earth conductor or the
protective earthing system in the installation is in doubt.
3.2.2 Using a Battery
This monitor can be equipped with rechargeable lithium -ion battery. If a battery is
installed, the monitor system automatically switches to the battery for power if AC
power is interrupted.
Installing a Battery
The battery compartment cover is on the bottom of the monitor. Refer to 15.3 Replacing
a Battery for additional information regarding battery installation.
NOTE
•
When a battery has been stored for a long time, or the battery is depleted,
recharge the battery at once. Otherwise, the low battery may not be
sufficient to power the monitor if the AC power is unavailable.
Charging a Battery
The battery is charged whenever the monitor is connected to an AC power source
regardless of whether the monitor is turned on or not.
When the battery is charging, the battery indicator is On. The battery charge icon on the
screen dynamically displays the charging status when the monitor is powered on.
3.2.3 Connecting Accessories
Insert the hose part of NIBP cuff to the connector on the side of monitor; insert the SpO
2
cable into the SpO
2
cable connector on the side of the monitor; insert the temperature
probe cable into the TEMP probe connector on the back of the monitor; if you have not
already done so, insert the CO
2
adapter into the CO
2
receptacle on the side of the