Mindray Accutorr 7, Operator'S Manual

Page: 46 / 200

3 - 10 Accutorr 7 Operator’s Manual
3. Set the [ Time Zone ].
NOTE
•
The default time zone is -0:0. Be sure to change the time zone as per your
location to avoid data time-stamp errors when the monitor transmits data to
the EMR.
•
Changing the time zone may affect the system time. Check the system time
after changing the time zone.
3.6.13 Enabling Auto Daylight Savings Time
The auto daylight savings time is off by default. To auto start the daylight savings time,
follow this procedure:
1. Select the [ Main ]
→
[ Maintenance>> ]
→
[ User Settings>> ]
→
Enter the required
password
→
Select [ Ok ].
2. Select the [ Others ]
→
[ Time Setup>> ].
3. Switch on [ Auto Daylight Savings Time ].
4. Adjust daylight savings time settings as necessary.
3.6.14 Configuring Unit
You can configure the measurement unit.
To enter the [ Unit Setup ] menu, select [ Main ]
→
[ General Setup>> ]
→
[ Unit Setup>> ]
and then the [ Unit Setup ] menu pops up.
3.6.15 Configuring Printout
You can select the items to be printed on the strip. By default, all items are selected.
To enter the [ Print Setup ] menu, select [ Main ]
→
[ General Setup>> ]
→
[ Print
Setup>> ] and then the [ Print Setup ] menu pops up.