Mindray Accutorr 7, Operator'S Manual

Page: 92 / 200

9 - 6 Accutorr 7 Operator’s Manual
5. Time of last measurement
6. Time remaining to next measurement
7. Measurement mode
9.7 Setting NIBP
Select NIBP parameter area to access the [ NIBP Setup ] menu.
9.7.1 Setting Interval
In [ NIBP Setup ] menu, you can select [ Interval ] and set to:
■
[ Manual ]: NIBP measurement is started manually.
■
[ 1 min ], [ 2 min ], [ 2.5 min ], [ 3 min ], [ 5 min ], [ 10 min ], [ 15 min ], [ 20 min ], [ 30 min ],
[ 1 h ], [ 1.5 h ], [ 2 h ]: The monitor automatically measures NIBP based on the
specified time interval.
■
[ Program 1 ] and [ Program 2 ]: The monitor automatically measures NIBP based on
a program configured by user.
9.7.2 Setting the Initial Cuff Inflation Pressure
You can set the initial cuff inflation pressure manually. In the [ NIBP Setup ] menu, select
[ Initial Pressure ] and then select the appropriate setting.
The initial inflation pressure range is as follows:
NOTE
•
For known hypertensive patients, you need to set the initial cuff pressure to a
higher value to reduce the measurement time.
9.7.3 Setting NIBP End Tone
The monitor can issue a reminder tone at the completion of NIBP measurement. The
NIBP End Tone is off by default. You can switch it on by accessing the [
NIBP Setup ]
menu.
Patient Category Range (mmHg) Default (mmHg)
Adult 80 - 280 160
Pediatric 80 - 210 140
Neonate 60 - 140 90