Mindray Accutorr 7, Operator'S Manual

Page: 126 / 200

14 - 6 Accutorr 7 Operator’s Manual
14.2.3 EMR Communication Setup
1. Select [ Main ]
→
[ Maintenance >> ]
→
[ User Settings >> ]
→
Enter the required
password
→
Select [ Ok ] to access User Settings menu.
2. Select [ Network>> ]
→
[ EMR Communication>> ] to access [ EMR
Communication Setup ] menu.
3. Set the IP address/domain name and port.
4. Select [
Ok
] to exit the menu.
NOTE
•
The domain name supports only English characters, symbols and numbers.
14.2.4 NTP Server Setup
1. Select [ Main ]
→
[ Maintenance >> ]
→
[ User Settings >> ]
→
Enter the required
password
→
Select [ Ok ] to access User Settings menu.
2. Select [ Network>> ]
→ [
NTP Setup>> ]
.
3. Select [ NTP Setup>> ] to enter the NTP Setup menu. Set the following properties:
◆
Set IP address and port.
◆
Set the interval.
4. Select [ Ok ] to exit the menu.
To manually start one time synchronization with the NTP server, follow this procedure:
1. Select [ Main ]
→
[ Maintenance >> ]
→
[ User Settings >> ]
→
Enter the required
password
→
Select [ Ok ] to access User Settings menu.
2. Select [ Network>> ]
→ [
NTP Setup>> ]
→ [
Manual
]
.
14.2.5 Realtime Data Send Interval (for HL7 only)
The monitor will send out the monitored parameter data at the set intervals.
1. Select [ Main ]
→
[ Maintenance >> ]
→
[ User Settings >> ]
→
Enter the required
password
→
Select [ Ok ] to access User Settings Menu.
2. Select [ Network>> ]
→ [
EMR Communication>>
].
3. Set [ Real Data Send ] to an appropriate setting.
14.2.6 Alarm Server Settings (for HL7 only)
1. Select [ Main ]
→
[ Maintenance >> ]
→
[ User Settings >> ]
→
Enter the required
password
→
Select [ Ok ] to access User Settings menu.
2. Select [ Network>> ]
→
[ Alarm Server Setup ].
3. Set the IP address and port.