Mindray Accutorr 7, Operator'S Manual

Page: 73 / 200

Accutorr 7 Operator’s Manual 6 - 11
6.10 Setting the Reminder Tone
When the alarm volume is set to zero, or alarm is reset, the monitor can issue a periodical
reminder tone. The interval of the reminder tone is 1 minute. You can switch on or off the
reminder tone.
1. Select [ Main ]
→
[ Maintenance >> ]
→
[ User Settings >> ]
→
Enter required
password
→
Select [ Ok ] to access [ User Settings ] menu.
2. Select [ Alarm Setup >> ] to access [ Alarm Setup ] menu.
3. Set [ Reminder Tone ] to [ On ] or [ Off ].
6.11 Latching Alarms
The latching setting for physiological alarms defines how alarm indicators behave when
you do not acknowledge them.
■
If an alarm is latched, alarm indications remain presented even though alarm
conditions end, except that:
◆
The parameter reading and violated alarm limit stop flashing.
◆
The time when the alarm is last triggered is displayed after the alarm
message.
■
If an alarm is not latched, the alarm indications disappear as soon as the alarm
conditions end.
When the alarm system is reset, the latched physiological alarms are cleared.
To latch a physiological alarm,
1. Select [
Main
]
→
[
Maintenance >>
]
→
[
User Settings >>
]
→
Enter required
password
→
Select [
Ok
] and then access [
User Settings
] menu.
2. Select [ Alarm Setup >> ].
3. Set [ Alarm Latch ] to [ High only ], [ High&Med ], [ All ] or [ Off ].
◆
[ High only ]: only high priority alarms are latched;
◆
[ Hi&Med ]: both high priority alarms and medium priority alarms are
latched;
◆
[ All ]: all alarms are latched; and
◆
[ Off ]: no alarm will be latched.
Only the unacknowledged physiological alarm can be latched. The latched alarms will
be cleared when the monitor enters the alarm reset state
.
WARNING