Mindray Accutorr 7, Operator'S Manual

Page: 122 / 200

14 - 2 Accutorr 7 Operator’s Manual
14.1.1 Selecting a Network Type
The equipment supports both wired and wireless (optional) networking. To set the
network type,
1. Select [ Main ]
→
[ Maintenance >> ]
→
[ User Settings >> ]
→
Enter the required
password
→
Select [ Ok ] to access the [ User Settings ] menu.
2. Select [ Network>> ]
→
[ Monitor Network Setup >> ] to access the [ Monitor
Network Setup ] menu.
3. Set [ Network Type ] to [ LAN ] or [ WLAN ].
14.1.2 Setting the Wired Network
To set the wired network, follow this procedure:
1. Select [ Main ]
→
[ Maintenance>> ]
→
[ User Settings >> ]
→
enter the required
password
→
Select [ Ok ] to access the [ User Settings ] menu.
2. Select [ Network >> ]
→
[ Monitor Network Setup >> ] to access the Monitor
Network Setup menu
.
3. Set the [ Network Type ] to [ LAN ].
4. Set the [ Address Type ] to [ DHCP ] or [ Manual ].
◆
If [ Address Type ] is set to [ DHCP ], the monitor can automatically acquire
network parameters.
◆
If [ Address Type ] is set to [ Manual ], you need to manually input the
monitor IP address, subnet mask and gateway address.
5. Click [ Ok ] to confirm the setting.
14.1.3 Setting the Wireless Network (Optional)
The monitor can be connected to a wireless network via a built-in Wi-Fi module. To set
the wireless network:
1. Select [ Main ]
→
[ Maintenance>> ]
→
[ User Settings >> ]
→
enter the required
password
→
Select [ Ok ] to access the [ User Settings ] menu.
2. Select [ Network >> ]
→
[ Monitor Network Setup >> ] to access the Monitor
Network Setup menu
.
3. Set the [ Network Type ] to [ WLAN ].
4. Set the [ Address Type ] to [ DHCP ] or [ Manual ].
◆
If [ Address Type ] is set to [ DHCP ], the monitor can automatically acquire
network parameters.
◆
If [ Address Type ] is set to [ Manual ], you need to manually input the
monitor IP address, subnet mask and gateway address.
5. Select [ WLAN Setup >> ] to access the WLAN setup menu.