Mindray Accutorr 7, Operator'S Manual

Page: 19 / 200

Accutorr 7 Operator’s Manual 1 - 3
•
Disposable accessories are not designed to be reused. Reuse may cause a risk
of contamination and affect the measurement accuracy.
•
Always install or carry the equipment properly to avoid damage caused by a
drop, impact, strong vibration or other mechanical force.
•
Dry the equipment immediately in case of rain or water spray .
•
When no battery is installed, make sure that the power supply is continuous.
A power interruption will result in patient data loss.
•
Store and use the equipment in specified environmental condition. The
monitor and accessories may not meet the performance specification due to
aging, stored or used outside the specified temperature and humidity range.
1.1.3 Notes
NOTE
•
Keep this manual in the vicinity of the equipment so that it can be easily
located when needed.
•
The software was developed in compliance with IEC60601-1-4. The
possibility of hazards arising from software errors is minimized.
•
This manual describes all the equipment features and options. Your
equipment may not have all of them.
•
During normal use, the operator is expected to face the front of the
equipment.
•
Put the equipment in a location where you can easily view and operate the
equipment.
•
The equipment uses a mains plug as a means of isolation to the mains power
supply. Do not position the equipment in a place difficult to access the mains
plug.
•
When disposing of the packaging material, be sure to observe the applicable
waste control regulations and keep it out of children’s reach.
•
At the end of its service life, the equipment, and its accessories, must be
disposed of in compliance with the guidelines regulating the disposal of such
products. If you have any questions concerning disposal of the equipment,
please contact Mindray
.