Mindray Accutorr 7, Operator'S Manual

Page: 138 / 200

16 - 2 Accutorr 7 Operator’s Manual
■
Never use abrasive materials, or corrosive cleaners (such as acetone or acetone-
based cleaners).
WARNING
•
Be sure to turn off the monitor and disconnect all power cables from the
outlets before cleaning the equipment.
•
Use only Mindray approved cleaners and disinfectants and methods listed in
this chapter to clean or disinfect your equipment. Warranty does not cover
damage caused by unapproved substances or methods.
•
We make no claims regarding the efficacy of the listed chemicals or methods
as a means for controlling infection. For infection control methods, consult
your hospital’s Infection Control Officer or Epidemiologist.
CAUTION
•
If you spill liquid on the equipment or accessories, contact Mindray or your
service personnel.
16.1.1 Cleaning
Clean your equipment on a regular basis. Consult your hospital's regulations before
cleaning the equipment.
The recommended cleaning agents include:
■
Sodium hypochlorite bleach (10%)
■
Isopropanol (70%)
To clean your equipment, follow these rules:
1. Shut down the monitor and disconnect it from AC power
.
2. Clean the display screen using a soft, clean cloth dampened with a cleaning agent
.
3. Clean the exterior surface of the equipment using a soft cloth dampened with a
cleaning agent
.
4. Wipe off all the cleaning solution with a dry cloth after cleaning if necessary.
5. Dry your equipment in a ventilated, cool place.
16.1.2 Disinfecting
If disinfecting is required because of hospital policy, cleaning the equipment before
disinfecting is recommended.
The recommended disinfectants include:
■
Sodium hypochlorite bleach (10%)