Mindray Accutorr 7, Operator'S Manual

Page: 61 / 200

Accutorr 7 Operator’s Manual 5 - 3
5.5 Transferring a Configuration
When installing several monitors with identical user configuration it is not necessary to
set each unit separately. Use a USB drive to transfer the configuration from monitor to
monitor.
To export the current monitor’s configuration:
1. Insert a USB disk to the monitor’s external device connector.
2. Select [ Export Config >> ] in the [ Manage Configuration ] menu.
3. In the [ Export Config ] menu, select the configurations and the user maintenance
settings to be exported. Then select the [ Export ] button. A status message will
report completion of the transfer.
To import the configuration from the USB drive to the monitor:
1. Insert a USB drive into the monitor’s external device connector.
2. Select [ Import Config >> ] in the [ Manage Configuration ] menu.
3. In the [ Import Config ] menu, select the configurations and the user maintenance
settings to be imported. Then select the [ Import ] button. A status message will
report completion of the transfer.
5.6 Loading a Configuration
You may make changes to some settings during operation. However, these changes or
the pre-selected configuration may not be appropriate for the newly admitted patient.
Therefore, the monitor allows you to load a desired configuration so as to ensure that all
the settings are appropriate for your patient.
To load a configuration:
1. Select [ Main ]
→
[ Load Configuration >> ]. The popup menu shows the existing
configurations on the monitor. Selecting [ Config on USB drive >> ] will show the
existing configurations on the USB drive.
2. Select a desired configuration.
3. Select [ Load ].
The current configuration is shown at the top of the [ Load Configuration ] menu.
5.7 Restoring the Latest Configuration Automatically
During operation, you may make changes to some settings. However, these changes
may not be saved as user configurations. To prevent the changes from being lost in case
of a sudden power failure, the equipment stores the configuration in real time. The saved
configuration is the latest configuration.
The monitor restores the latest configuration if it restarts within 60 seconds after a
power failure. And it restores the default configuration, rather than the latest
configuration, if it restarts 120 seconds after a power failure. The monitor loads either