Mindray Accutorr 7, Operator'S Manual

Page: 41 / 200

Accutorr 7 Operator’s Manual 3 - 5
CAUTION
•
Press and hold the power on/off switch for 10 seconds to forcibly shut down
the monitor if it could not be shut down normally. This may cause loss of
patient data.
•
The monitor restores the latest configuration if it restarts within 60 seconds
after a power failure. The monitor restores the default configuration
, rather
than the latest configuration , if it restarts 120 seconds after a power failure.
The monitor may load either the latest configuration or the default
configuration if it restarts from 60-120 seconds after a power failure.
•
Power failure may cause data corruption on the SD card . It is recommended
to turn off the monitor according to the normal procedures. Do not directly
unplug the power cord, unless there is a charged battery installed, or remove
the battery before shutting down the monitor
.
NOTE
•
To completely disconnect the power supply, unplug the power cord.
3.4 Using Key, Knob, Touchscreen
3.4.1 Using Keys
The monitor has three types of keys:
■
Softkey: A softkey is a graphic key on the screen, giving you fast access to certain
menus or functions. The monitor has two types of softkeys:
◆
Parameter keys: Each parameter area or waveform area can be seen as a
softkey. You can enter a parameter setup menu by selecting its
corresponding parameter area or waveform area.
◆
QuickKeys: QuickKeys are configurable graphical keys, located at the bottom
of the main screen.
■
Hardkeys: A hardkey is a physical key on a monitoring device, such as the Alarm
Reset hardkey
and admit patient hardkey on the front panel.
■
Pop-Up Keys: Pop-up keys are task-related menu keys that appear automatically
on the monitor screen when required. For example, the confirm pop-up key
appears only when you need to confirm a change.