Mindray Accutorr 7 Operator'S Manual Download Page 32

Page: 32 / 200

2 - 10

Accutorr 7 Operator’s Manual

indicates alarms are reset

indicates alarm sounds are turned off.

Parameter and waveform area: displays parameters and waveforms.

Manual input area: manually input physiological related values. This area does not
display by default. Refer to

4.2 Manually Input Patient Data

for additional

information.

Menu QuickKeys

◆

Main: Accesses the [

Main

] screen to configure the monitor, or quickly

returns to the main screen.

◆

Scoring: Accesses the [

Scoring

] screen to evaluate a patient’s condition.

Refer to

12 Clinical Scoring

◆

Patient List: Accesses the [

Local Patient List

] and [

ADT Database

] screen to

admit a patient stored in the monitor or ADT database. Refer to

4.1.3 Admitting a Patient from [Patient List]

◆

Review: Displays the spot check trends, continuous trends, Scoring Review,
and graphic trends. Refer to

4.5 Reviewing Patient Data

◆

Save: Accesses the [

Results

] screen to manually save patient data. Refer to

4.4 Manually Save Patient Data

Network and USB connection area

Display CMS information or Spot Check mode. For details for how to configure
CMS, refer to

14.3 Connecting the monitor to the CMS

Indicate the connection of network or USB to this monitor.

Battery status: indicates the status of the battery. For details, refer to

15 Battery

System time

Tabular trend area. This area displays only in Trend screen mode.

10.

NIBP list area. This area displays only in NIBP List screen mode.

indicates monitor is successfully connected to a wired network.

indicates the wireless function (optional) is working.

indicates monitor has failed to connect a wired network.

indicates the wireless function (optional) is not working.

indicates a USB drive is inserted.

Summary of Contents for Accutorr 7








































































































































































































Search results

Summary of Contents for Accutorr 7

Reviews:

Related manuals for Accutorr 7

Brands by name

Popular brands

Mindray Accutorr 7, Operator'S Manual

Search results

Summary of Contents for Accutorr 7

Reviews:

Related manuals for Accutorr 7

Brands by name

Popular brands