Mindray Accutorr 7, Operator'S Manual

Page: 37 / 200

Accutorr 7 Operator’s Manual 3 - 1
3
Basic Operation
3.1 Installation
WARNING
•
Connect only approved devices to this equipment. Devices connected to the
equipment must meet the requirements of the applicable IEC standards (e.g.
IEC 60950 safety standards for information technology equipment and IEC
60601-1 safety standards for medical electrical equipment). The system
configuration must meet the requirements of the IEC 60601-1 medical
electrical systems standard. Any personnel who connect devices to the
equipment’s signal input/output port is responsible for providing evidence
that the safety certification of the devices has been performed in accordance
to the IEC 60601-1. If you have any questions, please contact Mindray.
•
If it is not evident from the equipment specifications whether a particular
combination with other devices is hazardous, for example, due to summation
of leakage currents, please consult the manufacturers or else an expert in the
field, to ensure the necessary safety of patients and all devices concerned will
not be impaired by the proposed combination.
•
Use only screws and brackets specified by Mindray, or the screw could touch
the internal battery, causing monitor damage.
CAUTION
•
The equipment should be installed by authorized Mindray personnel.
NOTE
•
The software copyright of the equipment is solely owned by Mindray. No
organization or individual shall resort to modifying, copying, or exchanging
it or to any other infringement on it in any form or by any means without due
permission.