Mindray Accutorr 7, Operator'S Manual

Page: 18 / 200

1 - 2 Accutorr 7 Operator’s Manual
atmospheres , flammable anesthetics, or other flammable agents (such as
gasoline).
•
Before connecting the equipment to a power line, check that the voltage and
frequency ratings of the power line are the same as those indicated on the
equipment’s label or in this manual.
•
Do not open the equipment housings. All servicing or future upgrades must
be carried out by Mindray trained and authorized personnel.
•
Do not come into contact with patients during defibrillation. Otherwise
serious injury or death could result.
•
Do not touch the equipment’s metal parts or connectors when in contact with
the patient; otherwise patient injury may result.
•
Do not rely exclusively on the audible alarm system for patient monitoring.
Adjustment of alarm volume to a low level or off may result in a hazard to the
patient. Remember that alarm settings should be customized according to
different patient situations and always keeping the patient under close
surveillance is the most reliable way for safe patient monitoring.
•
The physiological data and alarm messages displayed on the equipment
should be reviewed by a clinician before being used for diagnostic
interpretation and treatment
.
•
To avoid inadvertent disconnection, route all cables in a way to prevent a
stumbling hazard. Wrap and secure excess cabling to reduce risk of
entanglement by patients or personnel.
•
The equipment uses a mains plug as isolation means to the mains power
supply. Please do not position the equipment in a place difficult to operate
the mains plug.
•
Magnetic and electrical fields are capable of interfering with the proper
performance of the equipment. For this reason, make sure that all external
devices operated in the vicinity of the equipment comply with the relevant
EMC requirements. Mobile phones and X-ray equipment are a possible source
of interference as they may emit higher levels of electromagnetic radiation.
1.1.2 Caution
s
CAUTION
•
Only use parts and accessories specified in this manual.
•
Remove the battery before shipping the monitor or if it will not be used for
an extended period of time.
•
Carefully route patient cabling to reduce the possibility of patient
entanglement.