Mindray Accutorr 7, Operator'S Manual

Page: 34 / 200

2 - 12 Accutorr 7 Operator’s Manual
2.6 Operating Modes
2.6.1 Monitor Mode
The monitor will automatically enter monitor mode after power on. Monitor mode is a
common mode for monitoring patient vital signs.
NOTE
•
In Monitor mode, physiological and technical alarms
,
and prompt messages
are supported .
2.6.2 Spot Check Mode
The Spot Check mode is intended for on-spot measurement in a short time period.
When Spot Check mode is On, [
Spot Check ] displays in the Network and USB
connection area at the top of the screen.
To enter Spot Check mode, select [ Main ]
→
[ Maintenance>> ]
→
[ User Settings>> ]
→
Enter required password
→
Set [ Spot Check ] to [ On ].
NOTE
•
CO
2
monitoring is not available in Spot Check Mode.
•
In Spot Check mode, technical alarms and prompt messages are supported,
but no physiological alarms
.
Monitor Mode vs. Spot Check Mode
The Monitor mode and Spot Check modes have all the features in common except the
following:
Functions Monitor Mode Spot Check Mode
Configure and use Sat-Seconds (Nellcor) Yes No
Access [ Alarm Setup ] tab
Yes No
Access [ Continuous Trends ] tab
Yes No
Access [ Graphic Trends ] tab
Yes No
Connect to the CMS Yes No