manualshive.com logo in svg

Mindray Accutorr 7, Operator'S Manual

The Mindray Accutorr 7 is an advanced patient monitor designed to provide accurate and reliable measurements. To ensure optimal usage, make sure to download the Operator's Manual, available for free download at manualshive.com. This comprehensive manual contains detailed instructions and valuable information for users of this exceptional product.

Share
Download
background image

6

Accutorr 7 Operator’s Manual

14.1.3 Setting the Wireless Network (Optional)  ........................................................................ 14 - 2
14.1.4 WLAN Test  .................................................................................................................................. 14 - 3
14.1.5 Selecting WLAN Band and Channels ................................................................................ 14 - 4
14.1.6 Setting up the Wireless Network (Optional)  .................................................................. 14 - 4

14.2 Setting Data Send Method  .................................................................................................................. 14 - 5

14.2.1 DNS Setup ..................................................................................................................................  14 - 5
14.2.2 ADT Communication Setup  ................................................................................................. 14  -  5
14.2.3 EMR Communication Setup ................................................................................................. 14  -  5
14.2.4 NTP Server Setup  ..................................................................................................................... 14 - 6
14.2.5 Realtime Data Send Interval (for HL7 only)  .................................................................... 14 - 6
14.2.6 Alarm Server Settings (for HL7 only) ................................................................................. 14 - 6
14.2.7 Setting the Data Encryption Switch .................................................................................. 14 - 7

14.3 Connecting the monitor to the CMS ................................................................................................ 14 - 7

14.3.1 Setting the CMS ........................................................................................................................ 14 - 7
14.3.2 Selecting a CMS ........................................................................................................................ 14 - 7
14.3.3 Clearing the Selected CMS at Startup  .............................................................................. 14 - 8

14.4 Managing Certificates  ........................................................................................................................... 14 - 8

14.5 Setting the Multicast Parameters ...................................................................................................... 14 - 8

14.5.1 DIAP Communication Setup ................................................................................................ 14  -  8

14.6 MLDAP  ........................................................................................................................................................ 14 - 9

14.6.1 Setting MLDAP  ......................................................................................................................... 14 - 9
14.6.2 Selecting Password for User Authentication  ................................................................. 14 - 9

15 Battery .....................................................................................................................................15 - 1

15.1 Overview  .................................................................................................................................................... 15 - 1

15.2 Charging a Battery  .................................................................................................................................. 15 - 2

15.3 Replacing a Battery ................................................................................................................................. 15 - 3

15.4 Battery Guidelines ................................................................................................................................... 15 - 3

15.5 Battery Maintenance .............................................................................................................................. 15 - 4

15.5.1 Conditioning a Battery ........................................................................................................... 15 - 4
15.5.2 Checking a Battery  .................................................................................................................. 15 - 5

15.6 Recycling a Battery  ................................................................................................................................. 15 - 5

16 Care, Cleaning and Maintenance  ..........................................................................................16 - 1

16.1 Cleaning and Disinfection .................................................................................................................... 16 - 1

16.1.1 Cleaning  ...................................................................................................................................... 16 - 2
16.1.2 Disinfecting ................................................................................................................................ 16 - 2
16.1.3 Sterilization  ................................................................................................................................ 16 - 3

16.2 General Inspection  ................................................................................................................................. 16 - 3

16.3 Maintenance and Testing Schedule ................................................................................................. 16 - 3

16.4 Checking Monitor Information  .......................................................................................................... 16 - 5

16.5 Visual Inspection  ..................................................................................................................................... 16 - 5

16.6 Power-on Test  .......................................................................................................................................... 16 - 6

16.7 Calibrating CO

2 

........................................................................................................................................ 16 - 6

16.8 Battery Check ............................................................................................................................................ 16 - 7

Summary of Contents for Accutorr 7









































































































































































































Reviews:

No comments

Related manuals for Accutorr 7

MacDon 963 Operator'S Manual preview
963
Brand: MacDon Pages: 89
Yates 903 Quick Start Manual preview
903
Brand: Yates Pages: 2
JAC HF Translation Of Original User Instructions preview
HF
Brand: JAC Pages: 100
3M Littmann 3200 User Manual preview
Littmann 3200
Brand: 3M Pages: 48
3M Littmann 3100 Instructions For Use Manual preview
Littmann 3100
Brand: 3M Pages: 19
3M Speedglas G5-01 User Instructions preview
Speedglas G5-01
Brand: 3M Pages: 62
Thomas & Betts Quickfit Nexus Exit Installation Manual preview
Quickfit Nexus Exit
Brand: Thomas & Betts Pages: 2
Ultimaker S7 Installation And User Manual preview
S7
Brand: Ultimaker Pages: 38
A&D UP-200 User Manual preview
UP-200
Brand: A&D Pages: 2
A&D RA3100 Omniace Instruction Manual preview
RA3100 Omniace
Brand: A&D Pages: 176
Datex-Ohmeda S/5 Aespire User'S Reference Manual preview
S/5 Aespire
Brand: Datex-Ohmeda Pages: 80
MacDon D65 Quick Start Manual preview
D65
Brand: MacDon Pages: 2
V-TAC 7817 Installation Instruction preview
7817
Brand: V-TAC Pages: 6
EarthQuaker Devices The Wave Transformer Manual preview
The Wave Transformer
Brand: EarthQuaker Devices Pages: 21
JB-Lighting Varycolor MICRO 150HTI User Manual preview
Varycolor MICRO 150HTI
Brand: JB-Lighting Pages: 18
olympia electronics GR-940/15L Quick Start Manual preview
GR-940/15L
Brand: olympia electronics Pages: 4
Yamaha MU80 Sound List preview
MU80
Brand: Yamaha Pages: 45
Algolith Dual SD/HD Video Delay VLD-1002-MD Installation And Operation Manual preview
Dual SD/HD Video Delay VLD-1002-MD
Brand: Algolith Pages: 30

Brands by name

Popular brands

Load more brands