2-3
© Copyright 2006 Microwave Data Systems Inc. All Rights Reserved
User Interface Manual
MDS FIVE Series
05-4574A01, Rev. C
Use Internet Explorer version 5.5 or above
Mozilla Firefox (latest version preferred)
Use the browser’s default settings. Refer to Section 6.2.1 and Section 6.2.2 for
intructions for obtaining a web browser.
The web interface also requires the use of Sun Java JVM version 1.2.2 or above.
Refer to Section 6.2.3 for intructions for obtaining Sun Java JVM.
2.1.4 Telnet/SSH client
When accessing the software via the CLI interface, use a telnet or SSH client. An
SSH client is similar to a telnet client except it accesses the target over a secure
connection.
Windows provides a Windows Standard telnet client that may be accessed
through the command prompt. An alternate telnet client may be used.
Refer to Section 6.2.4 for downloading PuTTY, a popular Telnet / SSH Client for
Windows.
2.1.5 SNMP
Configure SNMP manager for accessing the Target (Connected Product).
2.1.6 HyperTerminal
When connecting via a HyperTerminal program, use the following settings:
BaudRate=38400
Parity=none
DataBit=8
StopBit=1
The settings may be reconfigured based on system requirements.
2.2 Access rights for users
The system has five user access levels for configuring and viewing data through
the user interface. User accounts can be added and deleted for different access
levels. The five user levels and their corresponding user rights are described
below.
2.2.1 User Level 1 – Monitor
User has minimum access rights and can only view the following pages:
