User Interface Manual
© Copyright 2006 Microwave Data Systems Inc. All Rights Reserved
3-30
MDS FIVE Series
05-4574A01, Rev. C
3.3.13.3 CLI Configuration
1. Navigate to Administration
Æ
Device Configuration
Æ
Serial Number
Information.
2. All Serial Number related parameters are displayed with current/present
values.
3. SNMP Configuration
4. Select a parameter from the MIB section ccmSDIDUSysCfgDevInfoCards.
5. Use the SNMP GET command to get the value of the required parameter
6. The SNMP agent will return the actual value on successful get operation.
Upon failure, the SNMP agent will return an error if agent is not able to get
the value or the user does not have access rights to the selected
parameter
3.3.14 Security Configuration
User Access Level: Level 3
Figure 3-19. Security Configuration.
3.3.14.1 Description
The screen shown in Figure 3-19 enables the user to modify the security
configuration of the terminal. The options listed on this page are:
1.
HTTP
– Select Type of HTTP Access (SSL/None/Disabled).
2.
CLI
– Select Type of CLI Access (Telnet/ SSH / Disabled).
3.3.14.2 WEB Configuration
1. Navigate to Administration and click on the “Security Configuration” link in
the left panel.
2. The current values of the parameters are displayed.
