3-17
© Copyright 2006 Microwave Data Systems Inc. All Rights Reserved
User Interface Manual
MDS FIVE Series
05-4574A01, Rev. C
3.3.5.2 WEB Configuration
1. Navigate to Administration
Æ
Network Configuration
Æ
Syslog Configuration
in the left panel.
2. All Syslog related parameters are displayed with current/present values.
3. To revert to previous values, press Reset button.
4. To change parameters, enter new values and press the “update” button.
5. The page is refreshed and displayed with the updated or current/present
values.
6. If parameters are not updated with entered values, the values entered may
be invalid for that parameter.
3.3.5.3 CLI Configuration
1. Navigate to Administration
Æ
General Network Menu
Æ
Syslog
Configuration
2. All Syslog related parameters are displayed with current/present values.
3. To edit an individual parameter, enter its hotkey, edit its value and press
the Enter key.
4. To revert to the previous value, press the “Esc” key while editing the value.
5. Scroll through the options for the following parameters using the Space
Bar key and press the Enter key to select among the options.
a. Syslog facility
6. To update the edited parameter, press the hotkey for “Update”.
7. The page is refreshed and displayed with the updated or current/present
values.
8. If the parameters are not updated with the entered values, the values
entered may be invalid for that parameter.
3.3.5.4 SNMP Configuration
1. Select a parameter from the MIB section
ccmSDIDUSysCfgNetworkSysLog.
2. Use the SNMP GET command to get the value of the required parameter
3. Use the SNMP SET command to set the value of the required parameter
4. The SNMP agent will return the actual value upon successful set or get
operation. Upon failure, the SNMP agent will return an error if the value set
is out of range, or the agent is not able to get or set the value, or the user
does not have access rights to the selected parameter.
