3-23
© Copyright 2006 Microwave Data Systems Inc. All Rights Reserved
User Interface Manual
MDS FIVE Series
05-4574A01, Rev. C
3.3.9 Serial Configuration
User Access Level: Level 3
Figure 3-13. Serial Configuration.
3.3.9.1 Description
The screen shown in Figure 3-13 is used to configure the following serial port
related parameters.:
1.
Data Baud Rate
– Select the suitable baud rate for the selected device.
3.3.9.2 WEB Configuration
1. Navigate to Administration
Æ
Serial Configuration in the left panel.
2. All Serial port related parameters are displayed with current/present
values.
3. To revert to previous values, press Reset button.
4. To change the parameters, enter new values and press the “update”
button.
5. The page is refreshed and displayed with the updated or current/present
values.
6. If parameters are not updated with entered values, the value entered may
be invalid for that parameter.
3.3.9.3 CLI Configuration
1. Navigate to Administration
Æ
Serial Configuration.
2. All Serial related parameters are displayed with current/present values.
3. To edit an individual parameter, enter its hotkey, edit its value and press
the Enter key.
4. To revert to the previous value, press the “Esc” key while editing the value.
