3-39
© Copyright 2006 Microwave Data Systems Inc. All Rights Reserved
User Interface Manual
MDS FIVE Series
05-4574A01, Rev. C
To clear the event log from SNMP go to the MIB section
ccmSDIDUSysCfgMaintenanceEventLog, and SET the MIB
ccmSDIDUClearEventLog.
3.3.20 Restore System Defaults
User Access Level: Level 3
Figure 3-25. Restore System Defaults.
3.3.20.1 Description
The screen shown in Figure 3-25 enables the user to restore all terminal defaults.
3.3.20.2 WEB Configuration
To restore the terminal defaults, click the “restore” button.
3.3.20.3 CLI Configuration
1. Navigate to Restore Defaults screen.
2. Press the hotkey for “Restore Defaults”.
3. When asked for confirmation, press “y” to proceed or “n” to cancel.
4. A success or failure message will be displayed.
3.3.20.4 SNMP Configuration
1. Select a parameter from the MIB section ccmSDIDUSysCfgCmd
2. Use the SNMP SET command to set the value of the
ccmSDIDURestoreDefaults MIB object.
3. The SNMP agent will return the actual value upon successful set or get
operation. Upon failure, the SNMP agent will return an error if the value set
is out of range, or the agent is not able to get or set the value, or the user
does not have access rights to the selected parameter.
