3-35
© Copyright 2006 Microwave Data Systems Inc. All Rights Reserved
User Interface Manual
MDS FIVE Series
05-4574A01, Rev. C
3. Scroll through the options for the Level parameter using the Space Bar key
and press the Enter key to select one.
4. Press the hotkey for “Update” to add new user.
3.3.17.4 SNMP Configuration
1. Select a parameter from the MIB section
ccmSDIDUSysCfgMaintenanceUserMgmt
2. Use the SNMP GET command to get the value of the required parameter
3. Use the SNMP SET command to set the value of the required parameter
4. The SNMP agent will return the actual value upon successful set or get
operation. Upon failure, the SNMP agent will return an error if the value set
is out of range, or the agent is not able to get or set the value, or the user
does not have access rights to the selected parameter
The SNMP agent allows a maximum of 5 users. By default, the user name
“admin” with level 4 access rights will be present. The “admin” user’s passwords
can be changed from the CLI or WEB interfaces only.
New users can be added in SNMP v3 mode.
Warning
The Web and CLI interfaces restricts the maximum number of
users to 10. If 10 users exist, an error message will be
displayed. Delete an existing user to a add new user.
