User Interface Manual
© Copyright 2006 Microwave Data Systems Inc. All Rights Reserved
3-52
MDS FIVE Series
05-4574A01, Rev. C
6. If parameters are not updated with entered values, the value entered may
be invalid for that parameter.
3.3.26.4 SNMP Configuration
1. Select a parameter from the MIB section
ccmSDIDULinkCfgDataSTM1OC3Ports
2. Use the SNMP GET command to get the value of the required parameter
3. Use the SNMP SET command to set the value of the required parameter
4. The SNMP agent will return the actual value upon successful set or get
operation. Upon failure, the SNMP agent will return an error if the value set
is out of range, or the agent is not able to get or set the value, or the user
does not have access rights to the selected parameter
3.3.27 Authorization
User Access Level: Level 3
Figure 3-35. Authorization Key
3.3.27.1 Description
The screen shown in Figure 3-35 enables the user to enter an authorization key.
3.3.27.2 WEB Configuration
1. Navigate to Link Configuration and click on the “Authorization” link in the
left panel.
Warning
To configure STM-1 related parameters, the Optional IO and/or the
Mini IO card should be configured and present. Otherwise an error
message will be displayed.
