User Interface Manual
© Copyright 2006 Microwave Data Systems Inc. All Rights Reserved
3-42
MDS FIVE Series
05-4574A01, Rev. C
3.3.22.2 WEB Configuration
1. Navigate to Data Link and click on the “E1/T1 Channel Map” link in the left
panel.
2. The current values of the channel map are displayed.
3. Map desired timeslots to front panel ports.
4. Click the “Update” button to submit these changes.
5. Before updating the values in the system, the user interface performs a
validation to detect incorrect mapping. In case of failure, an error message
with the location of the error will be displayed. Before pressing update,
take care of the following conditions to avoid error.
a. Map all available timeslots.
b. Do not map a timeslot more than once.
c. Do not map a front panel port to both an east and a west timeslot.
d. For pass-through, map any timeslot in both east and west.
3.3.22.3 CLI Configuration
1. Navigate to Link Configuration
Æ
Data Links
Æ
E1/T1 Ports
Æ
E1/T1
Channel Map.
2. The current values of the channel map are displayed.
3. Map desired timeslots to front panel ports.
4. Click the “Update” button to submit these changes.
5. Before updating the values in the system, the user interface performs a
validation to detect incorrect mapping. In case of failure, an error message
with the location of the error will be displayed. Before pressing update,
take care of the following conditions to avoid error.
6. Map all available timeslots.
a. Do not map a timeslot more than once.
b. Do not map a front panel port to both east and west timeslot.
c. For pass-through, map any timeslot in both east and west.
3.3.22.4 SNMP Configuration
1. Select a parameter from the MIB section
ccmSDIDULinkCfgDataE1T1Ports
2. Use ccmSDIDUDataE1T1EastChMapFrontPanelTable,
ccmSDIDUDataE1T1EastChMapPassThruTable,
ccmSDIDUDataE1T1WestChMapFrontPanelTable and
ccmSDIDUDataE1T1WestChMapPassThruTable MIB sections to select
the channel mapping
3. Use ccmSDIDUE1T1ChMapReconfigure MIB variable to update the
selected channel map
