3-33
© Copyright 2006 Microwave Data Systems Inc. All Rights Reserved
User Interface Manual
MDS FIVE Series
05-4574A01, Rev. C
2. Select an Image type.
3. To toggle between images, press the toggle button.
4. In the event of an error, an appropriate error message will be displayed.
3.3.16.1 CLI Configuration
1. Navigate to Administration
Æ
Maintenance
Æ
reprogramming CPU screen.
2. Scroll through the file names using the Space Bar key and press the Enter
key to select one. Wait for few seconds to allow the screen refresh.
3. To toggle between images,
a. press the hotkey for toggle.
b. The result will be displayed on the screen.
c. In the event of an error, an appropriate error message will be
displayed.
3.3.16.2 SNMP Configuration
1. Select a parameter from the MIB section
ccmSDIDUSysCfgMaintenanceReprog
2. Use the SNMP GET command to get the value of the required parameter
3. Use the SNMP SET command to set the value of the required parameter
4. The SNMP agent will return the actual value upon successful set or get
operation. Upon failure, the SNMP agent will return an error if the value set
is out of range, or the agent is not able to get or set the value, or the user
does not have access rights to the selected parameter
Warning
A reboot is required after toggle of kernel, applications, FPGA, or
ODU
.
