3-19
© Copyright 2006 Microwave Data Systems Inc. All Rights Reserved
User Interface Manual
MDS FIVE Series
05-4574A01, Rev. C
3.3.6.2 WEB Configuration
1. Navigate to Administration
Æ
Network Configuration
Æ
E-mail Configuration
in the left panel.
2. All E-mail related parameters are displayed with current/present values.
3. To revert to previous values, press Reset button.
4. To change the parameters, enter new values and press the “update”
button.
5. The page is refreshed and displayed with the updated or current/present
values.
6. If parameters are not updated with entered values, the value entered may
be invalid for that parameter.
3.3.6.3 CLI Configuration
1. Navigate to Administration
Æ
General Network Menu
Æ
Configuration.
2. All E-mail related parameters are displayed with current/present values.
3. To edit an individual parameter, enter its hotkey, edit its value and press
the Enter key.
4. To revert to the previous value, press the “Esc” key while editing the value.
5. Scroll through the options for the following parameters using the Space
Bar key and press the Enter key to select among the options.
a. SMTP Enable
6. To update the edited parameter, press the hotkey for “Update”.
7. The page is refreshed and displayed with the updated or current/present
values.
8. If parameters are not updated with entered values, the value entered may
be invalid for that parameter.
3.3.6.4 SNMP Configuration
1. Select a parameter from the MIB section ccmSDIDUSysCfgNetworkEmail.
2. Use the SNMP GET command to get the value of the required parameter.
3. Use the SNMP SET command to set the value of the required parameter.
Note
Username and password should be left blank if the SMTP server
does not require authentication.
