User Interface Manual
© Copyright 2006 Microwave Data Systems Inc. All Rights Reserved
3-38
MDS FIVE Series
05-4574A01, Rev. C
3.3.18.4 SNMP Configuration
1. Select a parameter from the MIB section
ccmSDIDUSysCfgMaintenanceUserMgmt
2. Use the SNMP GET command to get the value of the required parameter
3. Use the SNMP SET command to set the value of the required parameter
4. The SNMP agent will return the actual value upon successful set or get
operation. Upon failure, the SNMP agent will return an error if the value set
is out of range, or the agent is not able to get or set the value, or the user
does not have access rights to the selected parameter
The default “admin” user cannot be deleted.
3.3.19 View Event Log
User Access Level: Level 3
Figure 3-24. Eventlog.
3.3.19.1 Description
This screen shown in Figure 3-24 enables the administrators of a terminal to view
the event log of the terminal and clear it when required. A log of terminal access is
available here in the form of a table listing user and time of login. This log is non-
volatile and available across terminal reboots. Pressing the “clear” button clears
the event log.
To access the event log from SNMP go to the MIB section
ccmSDIDUSysCfgMaintenanceEventLog.
Note
To change the password for a particular user, the user will have
to be removed and from the terminal and added again.
