7. Ethernet Interface
Provides communication and operation to a PC or laptop running the BALTOWin software.
Connecting the system’s ethernet interface in other ways (e.g. to a network) is not advised.
Ethernet interface according to EIA/TIA-568 and TSB-36.
Shielded twisted-pair cable.
Maximum length: 100 m.
6. USB Interface
Provides storing measurement results to a USB stick.
The data can be processed by BALTOWin.
Supports the connection of a keyboard.
6.4 Start button - System ready indicator
2
3
3
2
Fig 22:
Start button - System ready indicator
3. Start button :
When the BALTO System is ready to be started, the button will illuminate. Press the button to initiate system start-up.
During operation, the button is deactivated. The button will re-activate after completing a system shut-down.
2. System ready indicator :
The ‘System ready’ indicator is illuminated after a successful system start-up. This means the Control Unit and PLC are
operational and the BALTO system is ready for use.
6.5 Emergency Stop
In case of an emergency, press the Emergency Stop Button.
www.megger.com
23
Control Panel
