Error message
Example:
If an error code is displayed, please check for the following:
Faulty connections of the measurement cables.
Incorrect connection of the command button.
Faulty connections on the High-speed DC Circuit Breaker.
The time-out is exceeded.
9.10.3.5 Shunt Mode
This function is used for performing a Current Injection at a constant specified current. It can be used for calibrating
current monitoring systems.
Select ‘Shunt Mode’ in the ‘Manual Mode’ menu.
The maximum allowed duration of the Current Injection is limited to 60 seconds. However, if the battery level
becomes too low, the test will stop automatically.
www.megger.com
73
Operation
