Calibration steps can only be performed when the battery indicator is green.
Exporting calibration reports
The calibration reports are stored in PDF format.
To export the calibration reports, a USB stick can be connected to the USB interface insert on the Control Panel. All
calibration reports stored on the system will be automatically copied.
To ensure the latest calibration reports are exported, perform all the required calibrations first and then insert the USB
stick.
Example:
The calibration reports are only created if the operator presses ‘Save Report’ at the end of the calibration.
NOTE :
Please note that the BALTO System only saves the last calibration report for any given calibration
set. Any older calibration reports are overwritten.
12.2.3 Step 1/6 – OFFSET CALIBRATION
www.megger.com
126
Calibration
