Fig 31:
Power cable: Power Junction Bayonet Connector.
The Power Junction Bayonet Connectors must be plugged in smoothly. It is recommended to hold the Power Flex-
cable just below the connector, and to align it with the Power Junction Connector on the DC Current Generator.
Then, push in the cable with a short forward motion.
Avoid holding the Power Flex-cable by the connector, as it may hinder making the connection. Rough handling of the
connector may also damage the contact bands.
Once the connection is made, lock the bayonet connector.
Please ensure that the correct polarity is respected at both ends, as indicated on the High-speed DC Circuit Breaker
and the DC Current Generator.
For easier connectivity, breaker clamps can be used for connecting the Power Flex-cables to the High-speed DC
Circuit Breaker. These are available as a separate part.
Fig 32:
Connections using breaker clamps.
8.5 Connecting the High-speed DC Circuit Breaker.
It is imperative to follow these instructions carefully and to follow standard procedures, including performing a risk
analysis, before starting.
www.megger.com
29
Installation
