2. Safety Warnings and Standards
These safety warnings must be read and understood before the instrument is used. Retain for future reference.
When designing the BALTO System, special attention was given to safety, health and environment.
2.1 Fundamental rule
The BALTO System is designed to international safety standards and meets national safety legislation where it applies.
Nevertheless, those responsible for the operation of this equipment must understand hazards that can arise and
ensure that safe working procedures are in place to protect operators and other personnel.
If this equipment is operated in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
2.2 Warnings, Cautions and Notes
This user guide follows the internationally recognised definition. These instructions must be adhered to at all times.
Description
DANGER :
DANGER :
Indicates a dangerous situation which, if ignored, could lead to death, serious
injury or health problems.
WARNING : Indicates a potentially dangerous situation which, if ignored, could lead to death, serious
injury or health problems.
ATTENTION :
Indicates a dangerous situation which, if ignored, could lead to injuries or health
problems.
CAUTION : Indicates a situation which could lead to damage of the equipment or environment
NOTE :
Indicates important instructions to be followed to perform the relevant process safely and
efficiently.
Icon
Description
EN ISO 7010 P007
Interference to the operation of or damage to active implanted cardiac devices from this
equipment which generates strong electromagnetic fields.
No access for people with active implanted cardiac devices.
EN ISO 7010 W006
Strong magnetic field present
EN ISO 7010 W001
Consult the user instructions. Caution is necessary when operating the device or control close
to where this symbol is placed, or to indicate that an operation needs operator awareness and
protective action in order to avoid hazardous situations.
High voltage
Risk of electric shock
Pinch-point
DO NOT hold the Controller cover by the edges: fingers will be pinched in the gap.
Earth/Ground
2.3 Staff Obligations
Legal regulations concerning industrial safety – either within the company or imposed by status laws - must be
obeyed.
www.megger.com
3
Safety Warnings and Standards
