Enter the desired report file name and press ‘OK’ to confirm. The system will notify the operator when the report has
been saved successfully.
To cancel the save, press ‘OK’ without entering a report name.
After saving, the system will automatically prompt to clear the list of measurements. Press ‘Yes’ to clear the list of
measurements and begin a new report.
NOTE :
If the measurements table limit is reached, the operator must save the current measurements to a
report file, or clear the measurements by pressing ‘Clear List’:
Report files saved into the system can be exported using the BALTOWin software or by connecting a USB stick.
When connecting a USB stick to the USB interface all report files stored in the system will be automatically copied to
the USB stick.
Report files are stored and exported in BALTOWin format, CSV format and PDF format (which includes the
measurement injection graphs).
To clear all report files stored in the system, press the ‘Delete’ button. Confirm by pressing ‘Yes’ in the displayed pop-
up window:
www.megger.com
89
Operation
