Fig 27:
Charge/discharge tool.
The charge/discharge tool, included as a system accessory, shall be used for charging the DC Current Generators.
The module must be connected to the XLR 5-pin connector on one side and to the XLR 3-pin connector of the DC
Current Generator. The XLR-5 connector can be found on the support carriage of the BALTO Modular or on the main
unit of the BALTO Compact 4000.
To charge the DC Current Generator, press the black button. Pressing the red button will discharge the DC Current
Generator.
Fig 28:
Charging a DC Current Generator.
The LED lights will illuminate representing the DC Current Generator charge. The green LED being illuminated means
it is safe to connect the DC Current Generator.
CAUTION : Checking the DC Current Generator charge must be performed every time before connecting
the Current Generator to the energy compartment.
Ensure that all connectors are properly plugged in.
www.megger.com
27
Installation
