Code no. 34
Message:
Report “…” saved.
Cause:
The report file has been saved successfully.
Action:
Press OK to confirm.
Code no. 35
(Reserved for internal use.)
Code no. 36
(Reserved for internal use.)
Code no. 37
Message:
All report-files, logfiles and sample files deleted.
Cause:
The operator has pressed the ‘Delete’ button in the ‘Report’ dialog and confirmed the deletion.
The stored report files have been deleted.
Action:
Press OK to confirm.
Code no. 38
Message:
Nothing deleted.
Cause:
The operator has pressed the ‘Delete’ button in the ‘Report’ dialog but cancelled the deletion.
No files have been deleted.
Action:
Press OK to confirm.
Code no. 39
(Reserved for internal use.)
Code no. 40
Message:
I-ref Value too high. Max value: …
Action:
Reduce the I-test value.
Code no. 41
Message:
The Shunt Mode Current should be at least … A per Power Unit. Please set a higher value.
Action:
Increase the I-test value.
Code no. 42
(Reserved for internal use.)
Code no. 43
Message:
The time for this test is set too high. The time has been automatically reduced to its maximum
value.
Cause:
The test time configured in Shunt Mode exceeded the test time limit. The value has been
reduced.
Action:
Press OK to confirm.
Code no. 44
(Reserved for internal use.)
Code no. 45
(Reserved for internal use.)
Code no. 46
(Reserved for internal use.)
Code no. 47
(Reserved for internal use.)
Code no. 48
(Reserved for internal use.)
Code no. 49
Message:
Number of Power Units should be exactly 1.
Cause:
The operator attempted to start ‘Auto-Verification’, but the number of connected DC Current
Generators is zero or more than one.
Action:
Ensure exactly one DC Current Generator is connected to the system to perform ‘Auto-
Verification’.
Code no. 50
Message:
Current value too low. Please raise the value of I-ref (min=… A)
Action:
Increase the I_ref value.
Code no. 51
Reserved for secondary injection
Message
The system has detected at least one Current Generator.
Action
Open the DC High-Speed Circuit Breaker and remove all Current Generators.
www.megger.com
163
Troubleshooting.
