The ‘Main Menu’ is displayed as follows:
3
4
6
8
2
5
7
1
In the Main Menu, the operator can choose from the following sub-menus or functions:
Item
Description
1
Activate Safety Mode.
2
Back button for returning to the ‘Start Dialog’, also displays the system’s active configuration.
3
Access to the various test modes:
Quicktest Mode, Auto Mode, Manual Mode, µOhm Measurement and Measurement of auxiliary
contact.
4
Measurement reports:
Displayed in grey: no measurements recorded.
Displayed in yellow: contains measurements.
5
‘Info’ dialog containing system status and information.
6
Opens the ‘Auto-Verification’ dialog:
Test function for DC Current Generators.
7
The system battery voltage and charging current at this time.
8
Master/Slave configuration. (Only applicable to BALTO Modular.)
www.megger.com
47
Operation
