Administrator’s Guide
115
Creating Schedules
Refreshing the display
The display is normally refreshed every 10 seconds, but you can adjust this. If
you prefer to disable the automatic refresh, the display will only refresh when
you right-click a machine or group and choose
Scan
, or
Update Scan Status
.
Follow these steps to change the refresh settings:
1. On the Management Console main menu, click
Tools
, and then click
Options
.
The Options dialog box appears, with the Remote Installation page
showing (
Figure 4-12
).
Figure 4-12. Options dialog box
(Remote Installation page)
2. Click the Tracking Changes tab.
