LiteOn EVO 6800 Series, Manual

Page: 98 / 261

98
0 (Open) 0 (Open) C1-00 C1-01
1 (Closed) 0 (Open) C1-02 C1-03
0 (Open) 1 (Closed) C1-04 C1-05
1 (Closed) 1 (Closed)
C1-06 C1-07
Figure 6.21 illustrates an operation example for changing acceleration and deceleration times. b1-02
(Stopping Method Selection) = 0 (Ramp to Stop).
Output
Frequency
C1-00
Acc. Time 1
C1-01
Dec. Time 1
C1-02
Acc. Time 2
C1-03
Dec. Time 2
C1-04
Acc. Time 3
C1-01
Dec. Time 1
C1-05
Dec. Time 3
C1-06
Acc. Time 4
C1-07
Dec. Time 4
C1-01
Dec. Time 1
FWD/REV Run
Command
Acc./Dec. Time Selection 1
(Terminal S1 to S8, E1-□□ =16)
ON OFF ON ON ON OFF OFF OFF
ON ON OFF OFF
ON OFF
Acc./Dec. Time Selection 2
(Terminal S1 to S8, E1-□□ =17)
Figure 6.21 Operation of Acc./Dec. Time Change by Multi-Function Input
□ Switching Acceleration and Deceleration Times by Motor Selection
When setting E1-□□= 51 via a multi-function input, the motor can be switched between 1 and
2 by setting the input terminal On and Off. This function cannot be used for a PM motor.
When motor 1 is selected and E1-□□= 16 (Acc./Dec. Time Selection 1), the acceleration and
deceleration times can be switched between C1-00, C1-01 (Acc./Dec. Time 1) and C1-02, C1-03
(Acc./Dec. Time 2) for motor 1
When motor 2 is selected and E1-□□= 16 (Acc./Dec. Time Selection 1), the acceleration and
deceleration times can be switched between C1-04, C1-05 (Acc./Dec. Time 1 for Motor 2) and
C1-06, C1-07 (Acc./Dec. Time 2 for Motor 2). Refer to Table 6.10.
Table 6.10 Acc./Dec. Times Selection by Motor Selection
Acc./Dec. Time Selection 1
E1-□□= 16
Motor 1 Selected Motor 2 Selected
Acceleration Deceleration Acceleration Deceleration
Open C1-00 C1-01 C1-04 C1-05
Closed C1-02 C1-03 C1-06 C1-07