153
A negative signal by the gain and voltage bias is limited to 0%.
3 : 0 to 5 V
A negative signal by the gain and voltage bias is limited to 0%.
E3-07
Terminal A2 Function Selection
Sets the function for terminal A2. Refer to Table 6.21 on page 166.
No.
Name
Setting Range
Default
E3-07
Terminal A2 Function Selection
0 to 19
8
E3-08/E3-09 Terminal A2 Input Gain / Voltage Bias
E3-08 sets the terminal A2 input gain as a percentage when inputting 10V. E3-09 sets the
terminal A2 input voltage bias as a percentage when inputting 0V.
No.
Name
Setting Range
Default
E3-08
Terminal A2 Input Gain
-999.9 to 999.9%
100.0%
E3-09
Terminal A2 Voltage Bias
-999.9 to 999.9%
0.0%
E3-10 Terminal A2 (4-20mA disconnected selection)
No.
Name
Setting Range
Default
E3-10
Terminal A2 (4-20mA disconnected
selection)
0 ~ 3
0
0 : no disconnected selection
1 : By setting frequency P4-03，and displayed ANL
2 : Frequency is 0, and displayed ANL
3 : Stop immediately, and displayed the ACE
E3-11
Terminal A2 Input Filter Time
No.
Name
Setting Range
Default
E3-11
Terminal A2 Input Filter Time
0.00 to 2.00
0.5 s
Sets the terminal A2 primary delay filter time, which can stabilize the drive operation by
eliminating the interference. Long filter time stabilizes the drive but causes slow response to
the analog input signal changes.
E3-12
Analog Input Terminal Enable/ Disable Selection
No.
Name
Setting Range
Default
E3-12
Analog Input Terminal Enable/ Disable Selection
0 to 3
3
Enables the analog inputs when Multi-Function Terminal Input E1-□□ = 41 (Multi-Function
Summary of Contents for EVO 6800 Series
Page 1: ...MANUAL Compact Vector Drive EVO 6800 Series...
Page 33: ...33 34 2 36 0 2 8 93 0...
Page 35: ...35 4 2 Main Circuit...
Page 41: ...41 4 3 Control Circuit...
